3Com Wireless LAN Switch WX1200 Command Reference Manual page 139

Examples — The following command displays DHCP client information:
WX1200# display dhcp-client
Interface:
Configuration Status: Enabled
DHCP State:
Lease Allocation:
Lease Remaining:
IP Address:
Subnet Mask:
Default Gateway:
DHCP Server:
DNS Servers:
DNS Domain Name:
Table 30 describes the fields in this display.
Table 30 Output for display dhcp-client
Field Description
Interface VLAN name and number.
Configuration Status of the DHCP client on this VLAN:
Status
Enabled
Disabled
DHCP State State of the IP interface:
IF_UP
IF_DOWN
Lease Allocation Duration of the address lease.
Lease Remaining Number of seconds remaining before the address lease expires.
IP Address IP address received from the DHCP server
Subnet Mask Network mask of the IP address received from the DHCP server.
Default Gateway Default gateway IP address received from the DHCP server. If the
address is 0.0.0.0, the server did not provide an address.
DHCP Server IP address of the DHCP server.
DNS Servers DNS server IP address(es) received from the DHCP server.
DNS Domain Default DNS domain name received from the DHCP server.
Name
See Also
set interface dhcp-client on page 161
corpvlan(4)
IF_UP
65535 seconds
65532 seconds
10.3.1.110
255.255.255.0
10.3.1.1
10.3.1.4
10.3.1.29
mycorp.com
display dhcp-client 139