Set User Group - 3Com Wireless LAN Switch WX1200 Command Reference Manual

260 C 8: AAA C
HAPTER

set user group

OMMANDS
You can assign attributes to individual users and to user groups. If
attributes are configured for a user and also for the group the user is in,
the attributes assigned to the individual user take precedence for that
user. For example, if the start-date attribute configured for a user is
sooner than the start-date configured for the user group the user is in,
the user's network access can begin as soon as the user start-date. The
user does not need to wait for the user group's start date.
Examples — The following command assigns user Tamara to VLAN
orange:
WX4400# set user Tamara attr vlan-name orange
success: change accepted.
The following command assigns Tamara to the Mobility Profile tulip.
WX4400# set user Tamara attr mobility-profile tulip
success: change accepted.
The following command limits the days and times when user Student1
can access the network, to 5 p.m. to 2 a.m. every weekday, and all day
Saturday and Sunday:
WX4400# set user Student1 attr time-of-day Wk1700-0200,Sa,Su
success: change accepted.
See Also
clear user attr on page 216
display aaa on page 219
Adds a user to a user group. The user must have a password and a profile
that exists in the local database on the WX switch.
(To configure a user in RADIUS, see the documentation for your RADIUS
server.)
Syntax — set user username group group-name
username — Username of a user with a password.
group-name
Defaults — None.
— Name of an existing user group for password users.