Set Banner Motd - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set banner motd

See Also
crypto generate key on page 473
crypto generate self-signed on page 476
save config on page 584
set interface dhcp-client on page 161
set vlan port on page 117
Configures the banner string that is displayed before the beginning of
each login prompt for each CLI session on the WX switch.
Syntax —
set banner motd ^text^
— Delimiting character that begins and ends the message.
^
text — Up to 2000 alphanumeric characters, including tabs and
carriage returns, but not the delimiting character (^). The maximum
number of characters is approximately 24 lines by 80 characters.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — Type a caret (^), then the message, then another caret.
Do not use the following characters with commands in which you set text
to be displayed on the WX switch, such as message-of-the-day (MOTD)
banners:
Ampersand (&)
Angle brackets (< >)
Double quotation marks ("")
Number sign (#)
Question mark (?)
Single quotation mark (')
set banner motd 51