Set Service-Profile Psk-Raw - 3Com Wireless LAN Switch WX1200 Command Reference Manual

382 C 11: M
HAPTER
set service-profile
psk-raw
A P C
ANAGED CCESS OINT OMMANDS
Examples — The following command configures service profile sp3 to
use passphrase "1234567890123<>?=+&% The quick brown fox jumps
over the lazy sl":
WX4400# set service-profile sp3 psk-phrase "1234567890123<>
?=+&% The quick brown fox jumps over the lazy sl"
success: change accepted.
See Also
set mac-user attr on page 249
set service-profile auth-psk on page 375
set service-profile psk-raw on page 382
set service-profile wpa-ie on page 391
Configures a raw hexadecimal preshared key (PSK) to use for
authenticating WPA clients, in a service profile. Radios use the PSK as a
pairwise master key (PMK) to derive unique pairwise session keys for
individual WPA clients.
Syntax — set service-profile name psk-raw hex
name — Service profile name.
hex — A 64-bit ASCII string representing a 32-digit hexadecimal
number. Enter the two-character ASCII form of each hexadecimal
number.
Defaults — None.
Examples — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS converts the hexadecimal number into a 256-bit binary
number for system use. MSS also stores the hexadecimal key in the WX
switch's configuration. The binary number is never displayed in the
configuration.
To use PSK authentication, you must enable it and you also must enable
the WPA IE.