Set Mac-User Attr - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set mac-user attr

Assigns an authorization attribute in the local database on the WX switch
to a user who is authenticated by a MAC address.
(To assign authorization attributes through RADIUS, see the
documentation for your RADIUS server.)
Syntax —
set mac-user mac-addr attr attribute-name value
— MAC address of the user, in hexadecimal numbers
mac-addr
separated by colons (:). You can omit leading zeros.
attribute-name value
using to authorize the MAC user for a particular service or session
characteristic. For a list of authorization attributes and values that you
can assign to local users, see Table 44.
Table 44 Authentication Attributes for Local Users
Attribute Description
encryption-type Type of encryption
required for access by
the client. Clients who
attempt to use an
unauthorized encryption
method are rejected.
— Name and value of an attribute you are
Valid Value(s)
One of the following numbers that
identifies an encryption algorithm:
1—AES_CCM (Advanced
Encryption Standard using Counter
with CBC-MAC)
2—Reserved
4—TKIP (Temporal Key Integrity
Protocol)
8—WEP_104 (the default)
(Wired-Equivalent Privacy protocol
using 104 bits of key strength)
16—WEP_40 (Wired-Equivalent
Privacy protocol using 40 bits of
key strength)
32—NONE (no encryption)
64—Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types. For example, to specify
WEP_104 and WEP_40, use 24.
set mac-user attr 249