Display Spantree Portfast - 3Com Wireless LAN Switch WX1200 Command Reference Manual

402 C 12: STP C
HAPTER
display spantree
portfast
OMMANDS
Displays STP uplink fast convergence information for all network ports or
for one or more network ports.
Syntax —
display spantree portfast [port-list]
— List of ports. If you do not specify any ports, MSS
port-list
displays uplink fast convergence information for all ports.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows uplink fast convergence
information for all ports:
WX1200# display spantree portfast
Port
------------------------- ----
1
2
3
4
5
6
7
8
Table 70 describes the fields in this display.
Table 70 Output for display spantree portfast
Field
Port
VLAN
Portfast
See Also
set spantree portfast on page 415
Vlan Portfast
----------
1 disable
1 disable
1 disable
1 enable
1 disable
1 disable
1 disable
1 disable
Description
Port number.
VLAN number.
State of the uplink fast convergence feature:
Enable
Disable