Quality Of; Commands By Usage - 3Com Wireless LAN Switch WX1200 Command Reference Manual

6
6
Commands by
Usage
Q
UALITY OF
Use Quality of Service (QoS) commands to configure packet prioritization
in MSS. Packet prioritization ensures that WX switches and MAP access
points give preferential treatment to high-priority traffic such as voice and
video.
(To override the prioritization for specific traffic, use access controls lists
[ACLs] to set the Class of Service [CoS] for the packets. See "Security ACL
Commands" on page 445.)
This chapter presents QOS commands alphabetically. Use Table 27 to
locate commands in this chapter based on their use.
Table 27 QOS Commands by Usage
Type
QOS Settings
S
ERVICE
Command
display qos on page 123
display qos dscp-table on page 124
set qos cos-to-dscp-map on page 121
set qos dscp-to-cos-map on page 122
clear qos on page 120
C
OMMANDS