Set Radio-Profile Short-Retry - 3Com Wireless LAN Switch WX1200 Command Reference Manual

set radio-profile
short-retry
set service-profile cipher-ccmp on page 377
set service-profile cipher-tkip on page 378
set service-profile cipher-wep104 on page 379
set service-profile cipher-wep40 on page 380
set service-profile psk-phrase on page 381
set service-profile psk-raw on page 382
set service-profile rsn-ie on page 383
set service-profile shared-key-auth on page 384
set service-profile ssid-name on page 384
set service-profile ssid-type on page 385
set service-profile tkip-mc-time on page 386
set service-profile web-portal-form on page 387
set service-profile wep active-multicast- index on page 388
set service-profile wep active-unicast- index on page 389
set service-profile wep key-index on page 390
set service-profile wpa-ie on page 391
Changes the short retry threshold for the MAP radios in a radio profile.
The short retry threshold specifies the number of times a radio can send a
short unicast frame without receiving an acknowledgment.
Syntax — set radio-profile name short-retry threshold
name — Radio profile name.
threshold — Number of times the radio can send the same short
unicast frame. You can enter a value from 1 through 15.
Defaults — The default short unicast retry threshold for MAP radios is 5
attempts.
Access — Enabled.
History —Introduced in MSS Version 3.0.

set radio-profile short-retry

369