3Com Wireless LAN Switch WX1200 Command Reference Manual page 44

44 C 3: S
HAPTER YSTEM
WX4400# display system
===============================================================================
Product Name:
System Name:
System Countrycode: US
System Location:
System Contact:
System IP:
System idle timeout: 3600
System MAC:
===============================================================================
Boot Time:
Uptime:
===============================================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok
PSU Status: Lower Power Supply DC ok AC ok
Memory: 97.04/744.03 (13%)
Total Power Over Ethernet : 29.000
===============================================================================
S C
ERVICE OMMANDS
Examples — To show system information, type the following command:
WX4400
WX-bldg3
first-floor-bldg3
tamara@example.com
192.168.12.7
00:0B:0E:00:04:30
2003-11-07 15:45:49
13 days 04:29:10
temp2 ok
Table 7 describes the fields of display system output.
Table 7 display system output
Field
Product Name
System Name
System Countrycode
System Location
System Contact
System IP
temp3 ok
Upper Power Supply missing
Description
Switch model number.
System name (factory default, or optionally configured
with set system name).
Country-specific 802.11 code required for MAP operation
(configured with set system countrycode).
Record of the WX switch's physical location (optionally
configured with set system location).
Contact information about the system administrator or
another person to contact about the system (optionally
configured with set system contact).
Common interface, source, and default IP address for the
device, in dotted decimal notation (configured with set
system ip-address).