3Com Wireless LAN Switch WX1200 Command Reference Manual page 221

Table 42 display aaa Output (continued)
deadtime
key
author-pass
Radius Servers
Server
Addr
Ports
T/o
Tries
Dead
State
Server groups
Web Portal
set commands
user and user group
profiles
See Also
set accounting {admin | console} on page 225
set authentication admin on page 229
set authentication console on page 231
set authentication dot1x on page 233
Number of minutes the WX switch waits after determining
a RADIUS server is unresponsive before trying to reconnect
with this server. During the dead time, the RADIUS server
is ignored by the WX switch. The default is 0 minutes.
Shared secret key, or password, used to authenticate to a
RADIUS server. The default is no key.
Password used for outbound authentication to a RADIUS
server, used in conjunction with a last-resort username. By
default, a MAC user's MAC address is also used as that
user's password, and no global password is set.
Information about active RADIUS servers.
Name of each RADIUS server currently active.
IP address of each RADIUS server currently active.
UDP ports that the WX switch uses for authentication
messages and for accounting records.
Setting of timeouts on each RADIUS server currently active.
Number of retransmissions configured for each RADIUS
server currently active. The default is 3 times.
Length of time until the server is considered responsive
again.
Current state of each RADIUS server currently active:
UP (operating)
DOWN (unavailable)
Names of RADIUS server groups and member servers
configured on the WX switch.
State of the WebAAA feature:
enabled
disabled
List of commands used to configure AAA on the WX
switch.
List of user and user group profiles stored in the local
database on the WX switch.
display aaa 221