Display Snoop Stats - 3Com Wireless LAN Switch WX1200 Command Reference Manual

606 C 22: S
HAPTER NOOP

display snoop stats

WX1200# display snoop stats snoop1
Filter
===============================================================================
snoop1
C
OMMANDS
Displays statistics for enabled snoop filters.
Syntax —
display snoop stats [filter-name [dap-num [radio {1
| 2}]]]
filter-name
— Number of a Distributed MAP to which the snoop filter is
dap-num
mapped
— Radio 1 of the MAP
radio 1
— Radio 2 of the MAP. (This option does not apply to
radio 2
single-radio models.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Usage — The MAP retains statistics for a snoop filter until the filter is
changed or disabled. The MAP then clears the statistics.
Examples — The following command shows statistics for snoop filter
snoop1:
Dap Radio Rx Match
3 1
— Name of the snoop filter.
Tx Match
96
Dropped
4 0
Stop-After
stopped