Xerox WorkCentre 7132 Service Documentation page 345

024-351 IOT-ESS Communication 11 RAP
BSD-ON:3.1
The NAK that notifies of the occurrence of a transmission failure is received. (The Packet num-
ber of the received Message Packet is incorrect.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
Status-indicator-raps
024-351, 024-354
024-354 IOT-ESS Communication 14 RAP
BSD-ON:3.1
The NAK that notifies of the occurrence of a transmission failure is received. (A parity error was
detected by hardware of the UART.)
Initial Actions
Power Off/On
Procedure
Check that P/Js 402 on the MCU PWB (PL 11.1) and P/J 310 on the ESS PWB (PL 11.2) are
securely connected.
If the problem persists reload Software (ADJ 9.3.1).
January 2007
2-312
Revision
WorkCentre 7132