Pim Access - Avaya G430 Manual

Accessing the Branch Gateway
6. Configure the serial connection on the remote computer to match the configuration
The USB port settings
Baud
Data bits
Parity
Stop bits
flow control

PIM access

The Provisioning and Installation Manager (PIM) enables you to remotely configure devices,
primarily Branch Gateways on a network-wide basis. PIM provides integrated network system
views that ease centralized configuration tasks, especially provisioning and installing large
numbers of gateways simultaneously.
One of PIM's primary functions is to provision and configure Standard Local Survivability (SLS)
on the Branch Gateway. See
PIM is launched from the Avaya Network Management Console. The Avaya Network
Management Console is the central infrastructure application that discovers and monitors
enabled network devices and runs Avaya Integrated Management applications.
PIM must be installed on the same Windows server as Avaya Network Management Console
with System View and Avaya Secure Access Administration.
For detailed information about installing and launching PIM, see Avaya Integrated
Management Enterprise Network Management Installation and Upgrade.
32 Administering Avaya G430 Branch Gateway
To set the IP address of the USB port (i.e., the USB-modem interface), use the ip
address command. For a list of similar commands, see
commands for configuring the USB port for modem use
of the USB port on the Branch Gateway.
For more information, see
Port setting
Standard Local Survivability (SLS)
Comments? infodev@avaya.com
The USB port settings
-
8
none
1
hardware
Summary of CLI
on page 248.
on page 331.
Value
on page 101.
October 2013