Avaya G430 Manual page 237

Root level command First level command
interface
(dialer)
show ip rtp
header-
compression
Administering Avaya G430 Branch Gateway
ip rtp
compression-
connections
ip rtp header-
compression
ip rtp max-
period
ip rtp max-time
ip rtp non-tcp-
mode
ip rtp port-
range
ip tcp
compression-
connections
Description
sttistics for all enabled interfaces, do not
enter an interface type and number.
Clearing the statistics does not cause
renegotiation of parameters.
Enter the Dialer interface context
Control the number of Real-Time
Transport Protocol (RTP) connections
supported on the current interface. Use
no
the form of this command to restore the
default value of 16. This command also
sets the number of connections in the non-
TCP space, not just RTP
Enable both RTP and TCP header
compression on the current interface
Set the maximum number of compressed
headers that can be sent between full
headers
Set the maximum number of seconds
between full headers
Set the type of IP header compression to
ietf or non-ietf. When set to
ietf , the command performs IP header
compression according to IPHC RFCs.
non-ietf
When set to
performs IP header compression
compatible with other vendors, which do
not strictly follow the RFCs. The default
header compression mode is
ietf.
Set the range of UDP ports considered as
RTP on the current interface
Set the total number of TCP header
compression connections supported on
the current interface. Use the
command to restore the default value of
16.
Display header compression statistics for
a specific interface. If no interface is
specified, statistics for all interfaces are
displayed.
VoIP QoS
, the command
non-
no form this
October 2013 237