Avaya G430 Manual page 349

7. Generates QoS fault and clear traps.
Related topics:
Configuring the RTP statistics application
RTP statistics output
RTP statistics examples
Summary of RTP statistics commands
Configuring the RTP statistics application
About this task
To configure the RTP statistics application, work through the following sections, in order:
Procedure
1.
2.
3.
4.
5.
6.
7.
Related topics:
Viewing RTP statistics thresholds
RTP statistics thresholds
Administering Avaya G430 Branch Gateway
that enables offline troubleshooting of QoS problems.The trap rate is controlled by
a configurable trap rate limiter.
Note:
QoS trap generation is an especially convenient troubleshooting tool for large
installations, since all devices that support the RTP statistics application can be
configured to send traps to a single SNMP trap manager.
QoS fault traps are notifications that are sent when more than a configurable
number of active sessions have QoS indicators over the configured thresholds. A
QoS clear trap is a notification that is sent after a QoS fault trap when the number
of active RTP sessions with QoS indicators over the configured thresholds reduces
to a specified number.
on page 358
on page 373
Viewing RTP statistics thresholds
RTP statistics thresholds
RTP statistics application
Viewing application configuration
QoS traps on page 355
QoS fault and clear traps
The trap rate limiter on page 357
on page 352
on page 349
on page 381
on page 350
on page 352
on page 353
on page 354
on page 357
on page 350
Monitoring applications
October 2013 349