Avaya G430 Manual page 470

The router
Summary of OSPF commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level command
interface (dialer
fastethernet|
loopback|tunnel|
vlan)
470 Administering Avaya G430 Branch Gateway
Command
bandwidth
ip ospf
authentication
no ip ospf
authentication
ip ospf
authentication-
key
no ip ospf
authentication-
key
ip ospf cost
no ip ospf cost
ip ospf dead-
interval
no ip ospf dead-
interval
ip ospf hello-
interval
no ip ospf hello-
interval
ip ospf message-
digest-key
Comments? infodev@avaya.com
Description
Enter the Dialer, FastEthernet,
Loopback, Tunnel, or VLAN
interface context
Set the bandwidth parameter
manually for this interface
Specify the authentication type for
an interface
Remove the authentication type
for an interface.
Configure the interface
authentication password
Remove the OSPF password
Configure the Cost of an OSPF
interface, for the purpose of
determining the shortest path
Set the cost to its default value
Configure the interval before
declaring the neighbor as dead
Set the dead-interval to its default
value
Specify the time interval between
hello packets sent by the router
Set the hello-interval to its default
value
Specify the message-digest key
for the interface and enable OSPF
MD5 authentication
October 2013