Avaya G430 Manual page 608

Synchronization
Related topics:
Displaying synchronization status
Summary of synchronization commands
Displaying synchronization status
Procedure
Enter show sync timing to display the status of the local and remote primary,
secondary, and local clock sources.
The status can be Active, Standby, or Not Configured. The status is Not Configured
when a source has not been defined, for example, when there are no T1 cards
installed.
Example
Gxxx-???(super)# sh sync timing
SYNCHRONIZATION CONTROL: --- Local ---
SOURCE
---------
Primary
Secondary
Local
Active Source: v0
Done!
Summary of synchronization commands
For more information about these commands, see Avaya Branch Gateway G430 CLI
Reference.
Command
clear sync
interface
set sync
interface
set sync source
set sync
switching
608 Administering Avaya G430 Branch Gateway
MM or VoIP
-------------------
v0
Disassociate a previously specified interface as the primary or
secondary clock synchronization source
Define the specified module and port as a potential source for clock
synchronization for the Branch Gateway
Specify which clock source is the active clock source. The identity
of the current synchronization source is not stored in persistent
storage.
Toggle automatic sync source switching
Comments? infodev@avaya.com
on page 608
on page 608
STATUS
-----------------------
Not Configured
Not Configured
Active
Sync Source Switching: Enabled
Description
FAILURE
---------------
None
October 2013