Avaya G430 Manual page 312

SNMP
Root level command
set port trap
set snmp trap
enable |
disable auth
set snmp trap
enable |
disable frame-
relay
show port trap
show snmp
snmp-server
enable
notifications
snmp-server
host
snmp-server
informs
Summary of SNMP access configuration commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Command
ip snmp
set snmp
community
312 Administering Avaya G430 Branch Gateway
Command
Enable or disable the SNMP agent for the Branch Gateway
Create or modify an SNMPv1 community
Comments? infodev@avaya.com
Description
Enable or disable SNMP Link Up and
Link Down traps notifications and traps
on a port
Enable or disable authentication failure
traps for all managers
Enable or disable frame relay traps for
all managers
Display information on SNMP generic
Link Up and Link Down traps sent for a
specific port or for all ports
Display SNMP configuration information
Enable or disable the sending of all traps
and notifications from the Branch
Gateway
Identify an SNMP management server,
and specify the kind of messages it
no
receives. Use the form of the
command to remove the specified
server, or to disable a particular set of
notification types.
Configure the SNMPv3 timeout and
retries for notifications
Description
October 2013