Avaya G430 Manual page 168

Standard Local Survivability (SLS)
6. If this is an IP phone (set in Step
7. To enable DCP or IP phones (set in Step
8. For analog phones (set in Step
9. Enter set name name to identify the user name for the station.
10. Enter show to check the station administration of the station being programmed.
11. Enter exit to leave the station context in SLS.
Class values in SLS station context
analog
analog2500
Since there is just one entry, the model is optional; analog2500 is the default value.
4
168 Administering Avaya G430 Branch Gateway
password, where password is from four to eight digits in length, to administer a
password.
For example, set password 53136 establishes the password "53136" on a
previously-administered IP phone.
The phone automatically registers to the Branch Gateway upon failure if the
password and the extension number are the same as those administered in
Communication Manager.
Note:
Passwords are not required for analog or DCP phones unless an IP Softphone
is using the administrative identity of a DCP phone, in which case the password
is required.
module, enter set expansion-module yes.
switchhook flash signal (that offers subsequent transfer features), enter set
swhook-flash yes.
Use the 1 to 27 character name as specified on Communication Manager. Type the
name string inside double quotes.
The report lists the station parameters. For example:
Extension Type
--------- ----
49139 ip4620
ip station registered at address 'aaa.bbb.ccc.ddd'
Note:
For currently-registered IP phones or IP Softphones, the IP address displays.
dcp2402
4
Comments? infodev@avaya.com
1 on page 0
1 on page 0
1 on page 0
Port Cor Trunk-Des
---- ----- ---------
IPaddr local y
dcp
ip4601
), enter set password
) to have an expansion
) that you want SLS to recognize the
Exp-Mod Flash
------- -------
n -
ip
Password
--------
********
October 2013