Avaya G430 Manual page 365

Field
#jitter-event
Avg-Jitter
TTL (last/min/max) 44
Duplicates
Seq-Fall
DSCP
L2Pri
RTCP
Transmitted-RTP:
VLAN
DSCP
L2Pri
RTCP
Remote-Statistics:
Administering Avaya G430 Branch Gateway
Label Description
Combined with long RTT, a large jitter
value may indicate WAN congestion.
42 The RTP receiver network jitter event
counter
43 The average of all network jitter values
during the session
The last value of TTL, minimum value
of TTL, and maximum value of TTL
sampled during the session. TTL
changes during a session may indicate
route flaps in the IP network.
45 This counter increments each time two
consecutive RTP packets with the
sample RTP sequence number are
received. A large number of duplicates
may indicate problems in the Layer 2/
Ethernet topology (for example,
loops).
46 This counter increments each time an
RTP packet with a sequence number
less than the last known sequence is
received. Packet resequencing may
be caused by switching to a backup
WAN interface or route flaps.
47 The last received DSCP value of the
RTP packets
48 The last received Layer 2 priority value
of an RTP packet (usually
IEEE802.1p)
49 The total number of received RTCP
packets
50 The VLAN-ID on which the RTP
packets are transmitted
51 The DSCP of RTP packets
52 The Layer 2 priority of transmitted RTP
packets (usually 802.1p)
53 The total number of transmitted RTCP
packets
Monitoring applications
From the CLI
example
42
Jitter 0mS #0
Avg-Jitter 0mS
TTL(last/min/max)
63/63/63
Duplicates 0
Seq-Fall 0
DSCP 46
L2Pri 12
RTCP 54
VLAN 1
DSCP 184
L2Pri 6
RTCP 62
October 2013 365