Avaya G430 Manual page 289

Display RTR configuration values, including
all defaults, for a specific RTR operation or
for all RTR operations.
Display the global operational status of the
RTR feature, for a specific RTR operation or
for all RTR operations.
Display tracking information.
For more information about these commands, see
commands
Related topics:
Viewing RTR and object trackers logging
Example of tracking a single remote device
Example of tracking a group of devices
Procedure
1. Enter set logging session enable to enable logging to the CLI terminal.
2. Use the set logging session condition saa to view all RTR messages of
3. Use the set logging session condition tracker command to view all
Administering Avaya G430 Branch Gateway
Task
on page 296 or the Avaya Branch Gateway G430 CLI Reference
Viewing RTR and object trackers logging
For example:
Gxxx-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
level Info and above.
For example:
Gxxx-001# set logging session condition saa Info
Done!
CLI-Notification: write: set logging session condition saa Info
object tracker messages of level Info and above.
For example:
Gxxx-001# set logging session condition tracker Info
Done!
CLI-Notification: write: set logging session condition tracker Info
Command
show rtr configuration
show rtr operational-state
show track
Summary of object tracking configuration
on page 289
on page 290
on page 291
WAN interfaces
October 2013 289