Avaya G430 Manual page 241

Related topics:
Commands used to configure RTCP QoS parameters
Commands used to configure RSVP parameters
Summary of QoS, RSVP, and RTCP configuration CLI commands
Commands used to configure RTCP QoS parameters
Use the following commands to set the RTCP QoS parameters.
• set qos rtcp.
• show qos-rtcp
Avaya Branch Gateways G250 and G350 CLI Reference
For more information about these commands, see
configuration CLI commands
Avaya Branch Gateway G430 CLI Reference
Avaya Branch Gateway G450 CLI Reference
Commands used to configure RSVP parameters
VoIP can use the RSVP protocol to reserve network resources for voice data while
communicating with other Gateways and other VoIP entities, such as, IP phones and
Softphones.
• set qos rsvp
• show qos-rtcp
Avaya Branch Gateways G250 and G350 CLI Reference
For more information about these commands, see
configuration CLI commands
Avaya Branch Gateway G430 CLI Reference
Avaya Branch Gateway G450 CLI Reference
Summary of QoS, RSVP, and RTCP configuration CLI commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
Administering Avaya G430 Branch Gateway
on page 241
Summary of QoS, RSVP, and RTCP
on page 241, or the
Summary of QoS, RSVP, and RTCP
on page 241, or
on page 241
on page 241
October 2013
VoIP QoS
241