Avaya G430 Manual page 585

Root level
command
Administering Avaya G430 Branch Gateway
Command
ip-rule
Command
name
Assign a name to the current
DSCP table entry
show dscp-
Display the parameters of the
current DSCP table entry
table
Enter configuration mode for a
specified policy rule or, if the
rule does not exist, create it
and enter its configuration
mode
composite- Assign the specified
composite operation to the
operation
current rule
destinatio
Apply the current rule to
packets with the specified
n-ip
destination IP address
dscp Apply the current rule to
packets with the specified
DSCP value
fragment Apply the current rule for non-
initial fragments only
icmp Apply the current rule to a
specific type of ICMP packet
ip-protocol Apply the current rule to
packets with the specified IP
protocol
show Display the parameters of the
composite operation assigned
composite-
to the current rule
operation
show dscp- Display the current list's DSCP
table table
show ip- Display the attributes of the
current rule
rule
source-ip Apply the current rule to
packets from the specified
source IP address
tcp Apply the current rule to TCP
packets with the specified
destinatio
destination port
n-port
Policy lists
Description
October 2013 585