Avaya G430 Manual page 207

5. Use the show ip dhcp-client command to view the DHCP client
Examples of DHCP lease release and renew
• The release dhcp command example:
Gxxx-001(super)# release dhcp FastEthernet 10/2
Done!
• The renew dhcp command example:
Gxxx-001(super)# renew dhcp FastEthernet 10/2
Done!
A message appears displaying the IP address and mask assigned by the DHCP server.
For example:
Interface FastEthernet 10/2 assigned DHCP address 193.172.104.161, mask
255.255.255.0
For a description of these commands, see
commands
Commands used for DHCP client maintenance
• show ip dhcp-client
• show ip dhcp-client statistics
• clear ip dhcp-client statistics
For a description of these commands, see
commands
Administering Avaya G430 Branch Gateway
Note:
Whenever you change the value of a DHCP client parameter (such as, client-id,
or client hostname), enter ip address dhcp again to re-initiate DHCP address
negotiation using the new values.
parameters.
on page 208 or Avaya G430 Branch Gateway CLI Reference.
on page 208 or the Avaya Branch Gateway G430 CLI Reference
Switch Ethernet port configuration
Summary of DHCP client configuration CLI
Summary of DHCP client configuration CLI
October 2013 207