Avaya G430 Manual page 77

6. Repeat Step 5 to configure additional domain names.
7. Optionally, configure the number of DNS query retries, using the ip domain
8. Optionally, configure the timeout for a DNS query using the ip domain
9. The DNS resolver is enabled by default.
10. If either DHCP Client or PPP are configured in the Branch Gateway, you do not
Administering Avaya G430 Branch Gateway
This domain name will be used as a suffix to complete non-FQDN names
(hostnames that do not end with a dot).
• Assign an index number that ranks the domain name by priority.
• Specify the domain name.
You can configure up to six domain names.
Gxxx-001(config)# ip domain list 1 avaya.com
Done!
Gxxx-001(config)# ip domain list 2 emea.avaya.com
Done!
retry command.
The default value is 2.
Gxxx-001(config)# ip domain retry 4
Done!
timeout command.
The default value is 3 seconds.
Gxxx-001(config)# ip domain timeout 4
Done!
Gxxx-001(config)# ip domain lookup
Done!
need to configure DNS resolver because the DNS resolver is enabled by default.
In addition, the DHCP Client and PPP discover DNS servers automatically, so the
list of DNS servers include the automatically-learned DNS servers.
• For DHCP Client, enable DHCP Client by entering ip address dhcp. For
information about DHCP Client see
page 205.
Basic device configuration
Configuring the DHCP client on
October 2013 77