Avaya G430 Manual page 208

Ethernet ports
Examples of configuring DHCP client logging messages
• set logging session enable command example.
Gxxx-001# set logging session enable
Done!
CLI-Notification: write: set logging session enable
• set logging session condition dhcpc example:
Gxxx-001# set logging session condition dhcpc Info
Done!
CLI-Notification: write: set logging session condition dhcpc Info
Note:
You can also enable logging messages to a log file or a Syslog server. For a full description
of logging on the Branch Gateway, see
For a description of these commands, see
commands
Summary of DHCP client configuration CLI commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
clear ip
dhcp-client
statistics
interface
fastethernet
208 Administering Avaya G430 Branch Gateway
on page 208 or Avaya G430 Branch Gateway CLI Reference.
Command
clear ip dhcp-
client statistics
ip address dhcp
ip dhcp client
client-id
Comments? infodev@avaya.com
System logging on page 215.
Summary of DHCP client configuration CLI
Description
Clear the DHCP client statistics counters
Enter interface fastethernet configuration
mode
Clear the DHCP client statistics counters
Enable or disable IP address negotiation
via DHCP (applies to WAN FastEthernet
interfaces only)
Set the client identifier for the DHCP client
October 2013