Summary Of Etr Commands - Avaya G430 Manual

Emergency Transfer Relay (ETR)
Procedure
Enter set etr 3 manual-on
Deactiving ETR manually
Procedure
Enter set etr 3 manual-off.
Result
ETR does not become active in the event of a link failure.
Restoring ETR to automatic activation
Procedure
Enter set etr 3 autoEnter set etr 10 auto
If the system fails, the trunk and port in the MM714B are automatically latched.
A call in progress is terminated when ETR is activated either automatically or
manually.

Summary of ETR commands

For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Command
set etr
300 Administering Avaya G430 Branch Gateway
Note:
Enable or disable ETR mode on the Branch Gateway chassis
or on an MM714B media module, or enable the gateway to
control ETR mode automatically.
Comments? infodev@avaya.com
Description
October 2013