Avaya G430 Manual page 331

VLAN configuration examples
The following example deletes a statically bound VLAN from a port:
Gxxx-001(super)# clear port static-vlan 10/3 34
VLAN 34 is unbound from port 10/3
The following example deletes a VLAN and its interface:
Gxxx-001(super)# clear vlan 34
This command will assign all ports on VLAN 34 to their default in
the entire management domain – do you want to continue (Y/N)? y
All ports on VLAN-id assigned to default VLAN.
VLAN 34 was deleted successfully.
The following example sets the current VLAN as the ICC-VLAN:
Gxxx-001(super)# interface Vlan 66
Gxxx-001(super-if:Vlan 66)# icc-vlan
Done!
The following example enters configuration mode for a VLAN interface:
Gxxx-001(super)# interface Vlan 66
Gxxx-001(super-if:Vlan 66)#
The following example deletes a VLAN interface:
Gxxx-001(super)# no interface vlan 66
Done!
The following example statically binds a VLAN to a port:
Gxxx-001(super)# set port vlan-binding-mode 10/3 static
Set Port vlan binding method:10/3
The following example sets a port's VLAN ID:
Gxxx-001(super)# set port vlan 54 10/3
Port 10/3 added to VLAN 54
The following example sets a port's VLAN binding mode:
Gxxx-001(super)# set port vlan-binding-mode 10/3 bind-to-configured
Set Port vlan binding method:10/3
The following example configures the VLAN tagging mode of a port:
Gxxx-001(super)# set trunk 10/3 dot1q
Dot1Q VLAN tagging set on port 10/3.
The following example creates a VLAN:
Gxxx-001(super)# set vlan 2121 name Training
VLAN id 2121, vlan-name Training created.
The following example displays a list of the MAC addresses in the CAM of a VLAN:
Gxxx-001(super)# show cam vlan 54
Total Matching CAM Entries Displayed = 3
Dest MAC/Route Dest VLAN Destination Ports
------------------- ---- -----------------
Administering Avaya G430 Branch Gateway
Advanced switching
October 2013 331