Avaya G430 Manual page 239

3. To disable VJ TCP header compression on an interface, use the no ip tcp
Related topics:
Summary of Van Jacobson header compression CLI commands
Summary of Van Jacobson header compression CLI commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level command
clear ip tcp
header-
compression
interface
(dialer)
show ip tcp
header-
compression
Administering Avaya G430 Branch Gateway
Note:
The ip tcp header-compression iphc-format command always
overrides the ip tcp header-compression command, and activates IPHC-
type compression.
For example:
Gxxx-001# interface dialer 1
Gxxx-001(config-if:Dialer 1)# ip tcp header-compression
Done!
Note:
Once header compression is enabled, any change to a header compression
parameter is effective immediately.
header-compression command in the interface context.
First level command
ip tcp
compression-
connections
ip tcp header-
compression
on page 239
Description
Clear TCP header compression statistics
for all enabled interfaces or for a specific
interface
Enter the Dialer interface context
Set the total number of TCP header
compression connections supported on
the current interface
Enable TCP header compression on the
current interface
Display TCP header compression
statistics for a specific interface. If no
interface is specified, statistics for all
interfaces are displayed. Use this
VoIP QoS
October 2013 239