Avaya G430 Manual page 133

Administering branch gateway
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Name
The name of the person associated with this telephone or data module. The system uses this
value to create the system directory.
Note:
This field is supported by Unicode language display for the 4610SW, 4620SW, 4621SW,
and 4622SW telephones.
For more information on Unicode language display, see "Administering Unicode Display" in
Administering Avaya Aura
Note:
Avaya BRI stations support only ASCII characters. Non-ASCII characters, such as Eurofont
or Kanafont, are displayed incorrectly on a BRI station.
Note:
In the display for emergency notification when completing the Name field, fill the most
important identifying information at the beginning of the field. When an emergency call is
made and a crisis alert station with a 27-character display is notified, only 17 characters of
the Name field appear on the first display line, followed by the extension. The second line
contains the last three characters of the Name field, followed by the word EMERGENCY.
Characters 18 through 24 of the Name field are not displayed at all.
Using PIM to manage SLS administration on the Branch Gateway
Before you begin
Before enabling SLS, you must gather provisioning data from PIM and deliver it to the Branch
Gateway. Run PIM's Device Profile Wizard to perform this task. The Device Profile Wizard
gathers a subset of the Communication Manager translations (dial plan analysis and
destination routing instructions) and delivers them to the Branch Gateway. If PIM is not
available, this translation subset (the SLS data set) can be created manually, using the
procedure described in
gateway
on page 139.
About this task
PIM must be installed on and launched from the Avaya Network Management Console. For
information about PIM, see
Procedure
1. Ensure that the Network Management Console (NMC) has discovered the Branch
2. Before PIM's automatic scheduled SLS updates can work as expected, set the
Administering Avaya G430 Branch Gateway
®
Communication Manager.
Using the CLI to manually configure SLS administration on the
PIM access
Gateway.
device parameters for both the server and the Branch Gateway in the NMC:
Standard Local Survivability (SLS)
on page 32.
October 2013
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents