Policy List Displays And Tests - Avaya G430 Manual

Gxxx-001(super/QoS 402/dscp 7)# composite-operation dscp5
Done!
Composite operation dscp5 changes the mapping of packets entering the router with a DSCP
values of 7. DSCP value 5 is most likely to be mapped to a different CoS, making these packets
subject to a different set of behavioral rules.

Policy list displays and tests

To verify access control lists, QoS lists, and policy-based routing (PBR) lists, you can view the
configuration of the lists. You can also test the effect of the lists on simulated IP packets.
Related topics:
Policy list commands in context
Simulating packets
Simulated packet properties
Policy list commands in context
When viewing information about policy lists and their components, these commands produce
different results in different contexts.
• In general context:
- show ip access-control-list. Displays a list of all configured access control
lists, with their list numbers and owners
- show ip access-control-list list number detailed. Displays all the
parameters of the specified access control list
- show ip qos-list. Displays a list of all configured QoS lists, with their list
numbers and owners
- show ip qos-list detailed. Displays all the parameters of the specified QoS
list.
• In ip access-control-list context:
- show composite-operation
- show ip-rule. Displays a list of all rules configured for the list
- show list. displays the parameters of the current list, including its rules
• In ip access-control-list/ip-rule context:
- show composite-operation. Displays the parameters of the composite
operation assigned to the current rule
- show ip-rule. Displays the parameters of the current rule
Administering Avaya G430 Branch Gateway
on page 579
on page 580
on page 581
Policy lists
October 2013 579