Avaya G430 Manual page 288

WAN interfaces
4. Repeat step 3 to add as many object trackers as you require, up to a maximum of
5. If you specified a Threshold method of calculation in step 1, use the threshold
Object tracking configuration workflow
rtr
type
frequency
dscp
next-hop
source-address
wait-interval
fail-retries
success-retries
rtr-schedule
track id rtr
description
track id list
description
object 1
.
.
object n
threshold count
Tasks for maintaining object tracking
Using the show commands, you can display RTR and Object Tracking configuration, and
enable RTR and object tracking logging to a CLI terminal.
288 Administering Avaya G430 Branch Gateway
For example:
Gxxx-001(config-track list 10)# object 1
Done!
50.
count command to enter the threshold values.
For example, use the following command to specify that:
• The state of the object tracker will change from down to up if 2 or more hosts
are up, and
• The state of the object tracker will change from up to down if 1 or less hosts
are up
Gxxx-001(config-track list 10)# threshold count up 2 down 1
•
Done!
Note:
Object trackers operate indefinitely once they are defined. To stop the operation
of an object tracker, use the no track command to delete the object tracker.
Comments? infodev@avaya.com
October 2013