Policy List Attachments - Avaya G430 Manual

Policy lists

Policy list attachments

Attached to each interface on the Branch Gateway are policy lists, including the ingress access
control list, ingress QoS list, egress access control list, and egress QoS list.
Note:
You can also attach PBR lists to certain interfaces, but PBR lists are not attached to any
interface by default.
Related topics:
Packets entering the interface
Packets exiting the interface
Policy lists to packets
Policy list attachment configuration
Attaching policy lists and access control lists
Attaching policy lists and QoS lists
Removing a list
Packets entering the interface
When a packet enters the Branch Gateway through an interface, the Branch Gateway applies
the policy lists in the following order:
1. Apply the ingress access control list.
2. If the ingress access control list does not drop the packet:
The packet enters the Branch Gateway through the interface.
Packets exiting the interface
When a packet exits the Branch Gateway through an interface, the Branch Gateway applies
the policy lists in the following order:
1. Apply the egress access control list.
2. If the egress access control list does not drop the packet, apply the egress QoS
The packet exits the Branch Gateway through the interface.
564 Administering Avaya G430 Branch Gateway
on page 564
on page 564
on page 565
on page 566
• Apply the ingress QoS list.
• Apply the PBR list (if any).
list.
Comments? infodev@avaya.com
on page 565
on page 565
on page 566
October 2013