Avaya G430 Manual page 370

Monitoring applications
Label
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Example of QoS fault and clear trap output
The following is an example of the syslog message for the QoS fault and clear traps sent during
RTP session 35, which terminated at 11:13:40 on October 20:
1
Oct 20
2
11:10:54
LZ-SIT-SR1 snmptrapd[9407]: 135.8.118.252
[135.8.118.252]: TrapsysUpTime.0 = Timeticks: (43131114) 4 days,
23:48:31.14
, snmpTrapOID.0 = OID: avRtpQoSFault
, avRtpQoSFaultTh.0 =
INTEGER: 1
370 Administering Avaya G430 Branch Gateway
Description
The percentage contribution of jitter-buffer
underruns to the average codec loss
The percentage contribution of jitter-buffer
overruns to the average codec loss
The average of all network RTP packet loss values
sampled during the session
The network RTP packet loss event counter
The average of all network RTT values during the
session
The network RTT event counter
The network jitter at the RTP receiver
The minimum and maximum TTL values sampled
in the session
A counter that increments each time two
consecutive RTP packets with the sample RTP
sequence number are received
A counter that increments each time an RTP
packet with a sequence number less than the last
known sequence is received
The average network loss experienced by the
remote RTP receiver
A counter that increments each time the remote
loss is sampled over its threshold
A counter that increments each time the network
jitter experienced by the remote RTP receiver is
sampled over its threshold
The echo cancellation loss on the TDM bus. A high
value (that is, a low absolute value) may indicate
impairment of DCP terminals.
3
5
Comments? infodev@avaya.com
From the trap example
Jbuf 0.1%
Jbuf 0.1%/0.0%
Loss 0.0%
Loss 0.0% #0
RTT 376mS
RTT 376mS #38
Jtr #0
TTL 63-63
Dup 0
Fall 0
Rem{Loss 0.0%
Rem{Loss 0.0% #0
Rem{Loss 0.0% #0 Jtr #0
EC{Loss 45dB}
4
25
/0.0%
26
27
#0
28
29
#38
30
36
#0 Jtr #0}
37
Jtr #0}
38
}
October 2013