Avaya G430 Manual page 291

About this task
Figure 11: Tracking multiple remote devices
Procedure
1. The first step is to configure several RTRs.
2. The second step is to configure several object trackers.
Administering Avaya G430 Branch Gateway
Example of tracking a group of devices
In this case, RTR 5 tracks the device at IP address 10.0.0.1, and RTR 6 tracks the
device at IP address 20.0.0.1. For example:
Gxxx-001(config)# rtr 5
Gxxx-001(config-rtr 5)# type echo protocol ipIcmpEcho 10.0.0.1
Gxxx-001(config-rtr icmp 5)# wait-interval 2 seconds
Done!
Gxxx-001(config-rtr icmp 5)# fail-retries 3
Done!
Gxxx-001(config-rtr icmp 5)# success-retries 1
Done!
Gxxx-001(config-rtr icmp 5)# exit
Gxxx-001(config)# rtr-schedule 5 start-time now life forever
Gxxx-001(config)# rtr 6
Gxxx-001(config-rtr 6)# type tcpConnect dest-address 20.0.0.1 dest-port 80
Gxxx-001(config-rtr tcp 6)# frequency 500 milliseconds
Done!
Gxxx-001(config-rtr tcp 6)# dscp 34
Done!
Gxxx-001(config-rtr tcp 6)# next-hop interface fastethernet 10/2 mac-
address 00:01:02:03:04:05
Done!
Gxxx-001(config)# rtr-schedule 6 start-time now life forever
Gxxx-001(config-rtr tcp 6)# exit
In this case, object tracker 1 tracks the state of RTR 5, and object tracker 2 tracks
the state of RTR 6. For example:
Gxxx-001(config)# track 1 rtr 5
Gxxx-001(config-track rtr 1)# description "track rtr-5"
Done!
Gxxx-001(config-track rtr 1)# exit
Gxxx-001(config)# track 2 rtr 6
Gxxx-001(config-track rtr 2)# description "track rtr-6"
Done!
Gxxx-001(config-track rtr 2)# exit
WAN interfaces
October 2013 291