Avaya G430 Manual page 602

Policy-based routing
Root level
command
interface
ip pbr-list
602 Administering Avaya G430 Branch Gateway
First level Second level
command command
next-hop-ip
show next-
hop
ip pbr-
group
cookie
ip-rule
destination-
ip
dscp
fragment
icmp
ip-protocol
next-hop
show ip
next-hop-
list
show ip-rule
Comments? infodev@avaya.com
Description
Add the specified ip address to
the next hop path for this next-hop
list
Display the next-hop entries in the
current list
Enter the interface configuration
mode for a Dialer, Loopback, Fast
Ethernet, Tunnel or VLAN
interface
Apply the specified PBR list to the
current interface. The PBR list is
applied to ingress packets only.
Enter the context of the specified
PBR list. If the list does not exist,
it is created.
Set the cookie for the current list
Enter configuration mode for the
specified rule. If the specified rule
does not exist, the system creates
it and enters its configuration
mode.
Specify the destination IP
address of packets to which the
current rule applies
Specify the DSCP value that is set
by the current policy operation
Apply the current rule for non-
initial fragments only
Apply the current rule to a specific
type of ICMP packet
Apply the current rule to packets
with the specified IP protocol
Specify the next-hop policy to use
when the current rule is applied
Display the details of the next-hop
list or of all next-hop lists
Display the attributes of a specific
rule or all rules
October 2013