Avaya G430 Manual page 428

The router
vlan interface 1, configured above:
Gxxx-001(super-if:Dialer 1)# ip unnumbered 1 Vlan 1
Gxxx-001(super-if:Dialer 1)# exit
Gxxx-001(super)# !
The following sample routing table shows how routes discovered on unnumbered interfaces
by routing protocols are listed as via routes in the Next-Hop column:
Network
-----------
0.0.0.0
2.2.2.0
10.0.0.0
3.0.0.0
4.0.0.0
20.0.0.0
20.0.0.1
26.0.0.0
99.0.0.0
135.64.0.0
149.49.54.0
180.0.0.0
Summary of unnumbered IP interface configuration commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Root level
command
interface
(dialer|
fastethernet|
serial|
tunnel)
interface
(dialer|
428 Administering Avaya G430 Branch Gateway
Mask Interface
----- -------------
0 FastEth10/3
24 Vlan15
8 Vlan1
8 Tunnel1
8 Tunnel 1
8 Tunnel 1
32 Tunnel 1
8 Vlan 15
8 Vlan 99
16 FastEth 10/3
24 FastEth 10/3
8 Loopback 1
Command
Comments? infodev@avaya.com
Next-Hop Cost
--------------- --------
149.49.54.1 1
2.2.2.1 1
0.0.0.40 1
Via Dia.1 2
Via Dia.1 2
Via Dia.1 11112
Via Dia.1 22222
2.2.2.2 3
99.1.1.1 1
149.49.54.1 1
149.49.54.112 1
180.0.0.1 1
Description
Enter the Dialer ,
Serial , or Tunnel
Dialer
Enter the ,
Tunnel interface context
TTL Source
----- ---------
n/a STAT-HI
n/a LOCAL
n/a LOCAL
172 RIP
172 RIP
n/a OSPF
n/a OSPF
n/a STAT-LO
n/a LOCAL
n/a STAT-HI
n/a LOCAL
n/a LOCAL
FastEthernet ,
interface context
FastEthernet
, or
October 2013