Avaya G430 Manual page 390

Administering branch gateway
Hide thumbs Also See for G430:
Table of Contents

Advertisement

Monitoring applications
Wildcard: Type host, followed by an IP address using wildcards, to set a range of IP
addresses to which the rule applies. For example:
Gxxx-001(super-Capture 520/ip rule 20)# source-ip host 135.0.0.0
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Any: Type any to apply the rule to all IP addresses. For example:
Gxxx-001(super-Capture 520/ip rule 20)# destination-ip any
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
To apply the rule to all source or destination IP addresses except the specified address or
range of addresses, use the not form of the applicable command. For example:
Gxxx-001(super-Capture 520/ip rule 20)# not destination-ip 135.64.102.0 0.0.255.255
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
To specify a range of source and destination ports to which the rule applies, use the following
commands, followed by either port name or port number range criteria:
• tcp source-port. The rule applies to TCP packets from ports that match the defined
criteria
• tcp destination-port. The rule applies to TCP packets to ports that match the
defined criteria
• udp source-port. The rule applies to UDP packets from ports that match the defined
criteria
• udp destination-port. The rule applies to UDP packets to ports that match the
defined criteria
For information about parameters and default settings, see Avaya Branch Gateway G430 CLI
Reference.
The port name or number range criteria can be any of the following:
Range: Type range, followed by two port numbers, to set a range of port numbers to which
the rule applies. For example:
Gxxx-001(super-Capture 520/ip rule 20)# tcp destination-port range 1 3
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
Equal: Type eq, followed by a port name or number, to set a port name or port number to
which the rule applies. For example:
Gxxx-001(super-Capture 520/ip rule 20)# tcp source-port eq ftp
Done!
Gxxx-001(super-Capture 520/ip rule 20)#
390
Administering Avaya G430 Branch Gateway
Commands used to specify a range of source and destination ports
Port name or number range criteria
Comments? infodev@avaya.com
October 2013

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents