Avaya G430 Manual page 249

Root level
command
show
interfaces
show
interfaces
Administering Avaya G430 Branch Gateway
Command
async reset-
Reset the connected modem. You can use this
command from within an active PPP session
modem
over the USB modem
ip address Assign an IP address and mask to an interface.
This is the IP address to which a remote user
can connect using SSH/Telnet.
ip peer Change the IP address offered to a requesting
calling host during PPP/IPCP connection
address
establishment. By default, the interface offers its
own IP address plus one.
ppp Configure the authentication method used when
starting a client session on the PPP server.
authenticatio
See
n
parameters
ppp chap- Configure the shared secret used in PPP
sessions with CHAP authentication
secret
ppp timeout Set the maximum time to wait for an
authentication response
authenticatio
n
show ppp
Display PPP authentication status
authenticatio
n
shutdown Disconnect an active PPP session and shut
down the modem
timeout Set the number of minutes until the system
automatically disconnects an idle PPP incoming
absolute
session. By default, the timeout value is 10
minutes.
Display interface configuration and statistics for
a particular interface or all interfaces
usb-modem Display the USB-modem interface parameters,
the current status of the USB port, and the
identity of any USB modem connected to the
USB port.
Modems and the Branch Gateway
Description
The ppp authentication command
on page 248.
October 2013 249