Avaya G430 Manual page 170

Standard Local Survivability (SLS)
Administering DS1 parameters
Procedure
1. Enter ds1 slot-address, where slot-address is any permitted port.
2. Enter set name name to identify the user name for the DS1 trunk.
3. Enter set bit-rate rate to set the maximum transmission rate in Mbps for the
4. Enter set signaling-mode mode-type to set the signaling mode for the DS1
5. Enter set channel-numbering method to select the channel-numbering
170 Administering Avaya G430 Branch Gateway
The command line prompt changes to super-sls/ds1-<port-address>. If you
want to remove the ds1 trunk from the SLS administration, enter exit to leave the
second-level ds1 context and return to the (super-sls)# context, and then enter
clear ds1 slot-address.
Note:
If configuration changes affecting trunk provisioning (such as, signaling and bit-
rate) are made to a DS1 trunk where the trunk and its associated signaling group
have already been provisioned, an error message instructs you that the
Administrative change is in violation with existing trunk
member provisioning, and the configuration change is rejected.
Use the 1 to 27 character name as specified on Communication Manager (add
trunk-group n). Type the name string inside double quotes.
DS1 facility.
The rate can be either 1544 (T1) or 2048 (E1).
facility, where mode-type is one of the following values:
• cas. Out-of-band signaling for E1 service, yielding thirty 64 kbps B-channels
for voice transmission
• robbed bit. In-band signaling for T1 service, yielding twenty-four 56 kbps B-
channels for voice transmission
• isdnpri. T1 or E1 ISDN Primary Rate service (supports both FAS and NFAS)
• isdnext. NFAS T1 or E1 ISDN service for:
- T1 facility, in which all 24 channels are for bearer transport
- E1 facility, in which all 31 channels are for bearer transport
method for B-channels on an E1 interface, where method is one of the following
values:
• seq. Sequential codes of B-channels 1-30 in the ISDN Channel Identification
IE
• tslot. Timeslot method
Comments? infodev@avaya.com
October 2013