Avaya G430 Manual page 140

Standard Local Survivability (SLS)
number 10 is not administered on the Communication Manager server, even though the
Branch Gateway's SLS engine has that port administered, the port is unusable during SLS
operation on the Branch Gateway. This is because the hardware port configuration on the
media modules is initially configured by Communication Manager in subtending gateway
mode, by using the H.248 control channel to push information down to the Branch
Gateway.
SLS capacities
The maximum number of legacy stations and trunks that can be supported is dependent upon
the slot-module configuration of what is installed.
G430
You can collect the Communication Manager data using the Communication Manager
administrative SAT interface. For instructions on accessing the Avaya Aura
Manager through the Branch Gateway, see
Collecting analog stations data
Procedure
1. At the SAT, enter list media-gateway to display a list of administered
2. Look for supported gateways in the Type field.
3. Once you know the Branch Gateway of interest, match the Branch Gateway model
4. At the SAT, enter display port port-number, where port-number is the analog
5. Once you know the extension, enter display station extension to display the
6. Gather the necessary information for the following fields:
140 Administering Avaya G430 Branch Gateway
Branch Gateway model
gateways.
with the analog station ports.
• MM711
• MM714
• MM716
station port on the Branch Gateway.
The system displays the extension number assigned to the port.
Station screen for this extension.
Use Collecting DCP stations data
Comments? infodev@avaya.com
IP stations
150
Accessing the registered MGC
on page 141 as a reference.
®
Communication
on page 72.
October 2013