Avaya G430 Manual page 287

Configuring a track list
Object tracking configuration workflow
Configuring a simple object tracker
Procedure
1. Use the track id rtr command to specify the RTR to be tracked.
2. Use the description command to enter a description for the object tracker.
Configuring a track list
Procedure
1. Use the track id list command to enter track list configuration mode, to specify
2. Use the description command to enter a description for the track list.
3. Use the object command to add an object tracker to the list.
Administering Avaya G430 Branch Gateway
on page 287
Enter a number from 1 to 50 as the unique ID for this object tracker.
For example:
Gxxx-001(config)# track 1 rtr 5
Gxxx-001(config-track rtr 1)#
For example:
Gxxx-001(config-track rtr 1)# description "track rtr-5"
Done!
the unique ID of the track list from 1 to 50, and to specify how to calculate the state
of the track list.
The calculation can be either a Boolean or a Threshold calculation.
Note:
If you do not specify how to calculate the state of the track list, it is calculated by
default using the Boolean AND argument. This means that the list is up if all
objects are up, and down if one or more of the objects are down.
Examples:
Gxxx-001(config-track list 10)# description "track list rtr-5 and rtr-6"
Done!
Gxxx-001(config)# track 10 list boolean or
Gxxx-001(config-track list 10)#
Note:
The object tracker can be a simple one tracking a single RTR, or a track list.
on page 288
WAN interfaces
October 2013 287