Avaya G430 Manual page 228

System logging
Syslog server example
The following example defines a Syslog server with the following properties:
• IP address 147.2.3.66
• Logging of messages enabled
• Output to the Kernel facility
• Only messages that can be viewed by read-write level users are received
• Filter restricts receipt of messages from all applications to those less severe than error
Gxxx-001(super)# set logging server 147.2.3.66
Done!
Gxxx-001(super)# set logging server enable 147.2.3.66
Done!
Gxxx-001(super)# set logging server facility kern 147.2.3.66
Done!
Gxxx-001(super)# set logging server access-level read-write 147.2.3.66
Done!
Gxxx-001(super)# set logging server condition all error 147.2.3.66
Done!
Log file example
The following example enables the logging of system messages to a log file in the flash memory
and creates a filter to restrict the receipt of messages from the boot application to those with
severity level of informational or more severe, and messages from the cascade application
to those with severity level of alert or more severe.
Gxxx-001(super)# set logging file enable
Done!
Gxxx-001(super)# set logging file condition boot informational
Done!
Gxxx-001(super)# set logging file condition cascade alert
Done!
Session log example
The following example enables a session log for a user wishing to debug the ISAKMP
application, while only receiving messages of severity level error or stronger for all other
applications. Therefore, the user sets the default severity level for all applications to error, and
then sets the severity of the ISAKMP application to informational. Finally, the user displays the
filter settings.
Gxxx-001(super)# set logging session enable
Done!
Gxxx-001(super)# set logging session condition all Error
Done!
Gxxx-001(super)# set logging session condition ISAKMP Informational
228 Administering Avaya G430 Branch Gateway
Comments? infodev@avaya.com
October 2013