Avaya G430 Manual page 319

2. Use the set contact-closure pulse-duration command to set the length
Activating a contact closure manually
Procedure
Use the set contact-closure admin command with the parameter manual-
trigger.
In the following example, the command activates contact closure in relay 1 of the Avaya
Partner Contact Closure Adjunct
it by using the set contact-closure admin command with the parameter
manual-off or mgc.
set contact-closure admin 10/1:1 manual-trigger
Deactivating a contact closure manually
Procedure
Use the set contact-closure admin command with the parameter manual-off.
In the following example, the command deactivates contact closure in relay 2 of the
Avaya Partner Contact Closure Adjunct
automatically, until you use the set contact-closure admin command to change
the status of contact closure to mgc or manual-trigger.
set contact-closure admin 10/1:2 manual-off
Showing contact closure status
Procedure
Use the show contact-closure command to display the status of one or more
contact closure relays.
Administering Avaya G430 Branch Gateway
In the following example, the command sets contact closure to work in relay 1 of
the Avaya Partner Contact Closure Adjunct
controller.
set contact-closure admin 10/1:1 mgc
of time for the relay to return to normal after the call controller triggers it.
In the following example, the command sets relay 2 of the Avaya Partner Contact
™
Closure Adjunct to return to normal five seconds after the call controller triggers
contact closure in the relay.
set contact-closure pulse-duration 10/1:2 5
™
when activated by the call
™
. Contact closure remains active until you deactivate
™
. Contact closure will not operate, even
Contact closure
October 2013 319