Avaya G430 Manual page 281

You can enable dynamic CAC on the following interface types:
• FastEthernet
• GRE Tunnel
• VLAN
Note:
Since VLAN interfaces are always up, configuring dynamic CAC on a VLAN interface
provides a means to have a default dynamic CAC bandwidth.
Related topics:
Dynamic CAC tasks
Summary of dynamic CAC configuration commands
Dynamic CAC tasks
Enabling dynamic CAC and setting
maximum bandwidth
Displaying bandwidth information
Note:
Dynamic CAC also requires configuration of the Avaya Aura
details, see Administrator Guide for Avaya Aura
For more information about these commands, see
commands
Summary of dynamic CAC configuration commands
For more information about these commands, see the Avaya G430 CLI Reference.
Root level
command
interface (dialer|
loopback|
fastethernet|tunnel|
vlan)
Administering Avaya G430 Branch Gateway
on page 281
Task
on page 281 or Avaya Branch Gateway G430 CLI Reference .
Command
dynamic-cac-
bbl
on page 281
Command
dynamic-cac bbl
show dynamic-cac
®
Communication Manager. For
®
Communication Manager.
Summary of dynamic CAC configuration
Description
Enter theDialer, Loopback, FastEthernet,
Tunnel, or VLAN interface configuration
context
Enable dynamic CAC on the interface and set
the maximum bandwidth for the interface. The
dynamic-cac bbl command includes the
following parameters:
• bbl . The bearer bandwidth limit (kbps).
The MGC enforces this as the maximum
WAN interfaces
October 2013 281