Avaya G430 Manual page 134

Standard Local Survivability (SLS)
3. Make sure the Communication Manager has been configured for SLS as described
4. Click the Device Profiles icon/link in the top-level toolbar of the main PIM
5. Click the New icon on the Device Profile list page that appears in the right panel
6. Proceed through the Device Profile Wizard to the Details page.
7. Proceed through the Device Profile Wizard to the SLS / ARS page and perform the
8. Optionally click the following buttons:
9. If this Branch Gateway has not been previously provisioned, click Add ARS
10. Use the SLS Update Schedule page to administer up to six SLS updates per day.
134 Administering Avaya G430 Branch Gateway
• Server. Communication Manager login and password
Note:
The server must be the first listing in NMC's discovery output. If an
Survivable Core Server node is discovered and listed prior to the main
server, the main server's login/password will not permit access to the
Survivable Core Server node.
• Gateway. SNMPv1/v3 access parameters
• Gateway. NMC has discovered the Branch Gateway's IP address
in Configuring Communication Manager for SLS
window.
Alternatively, select PIM Objects > Device Profiles from the left panel.
of the main PIM window.
If this is not a new profile, open the existing profile from the left panel or from the
Device Profile list page.
Set the CM version field to 4.0.
following:
a. Select the Enable the SLS feature on this device? checkbox to enable SLS
on the Branch Gateway.
A cleared checkbox means that SLS is disabled.
b. Select the Perform scheduled SLS updates on this device? checkbox to
send the SLS administration data set to the Branch Gateway according to the
settings on the SLS Update Schedule screen.
• View Extract
• Perform Extract
• Actions
Entry to open the ARS Entry page.
a. Check the Enable SLS Updates box.
b. Set as many as six Daily Updates.
Comments? infodev@avaya.com
on page 120.
October 2013