Chapter 7: Ethernet ports
Switch Ethernet port configuration
Ethernet ports on the Branch Gateway switch
The switch on the Branch Gateway has 10/100 Mbps fixed switch ports on the front panel (ports
10/3 and 10/4).
Ethernet ports on the Branch Gateway router
The router on the Branch Gateway has a 10/100 Mbps fixed router port on the front panel (port
10/2).
Cables used for connecting devices to the fixed router
Use a standard network cable when you connect one of the following devices to the fixed router
port:
• WAN endpoint device
• Switch
• Router
Use a crossover network cable when you connect a computer or other endpoint device to the
fixed router port. For all other Ethernet ports on the Branch Gateway, you can use either a
standard network cable or a crossover network cable to connect any device.
Administering Avaya G430 Branch Gateway
October 2013
199