Avaya G430 Manual page 478

The router
Fragments are usually not reassembled until final destination. The Branch Gateway supports
fragmentation of IP packets according to RFC 791, and reassembly of IP packets destined
only to its interfaces.
Related topics:
Summary of fragmentation commands
Summary of fragmentation commands
For more information about these commands, see the Avaya Branch Gateways G250 and
G350 CLI Reference.
For more information about these commands, see the Avaya Branch Gateway G430 CLI
Reference.
Command
clear
fragment
fragment
chain
no fragment
chain
fragment size
no fragment
size
fragment
timeout
no fragment
timeout
show fragment
478 Administering Avaya G430 Branch Gateway
on page 478
Clear the fragment database and restore its default values
Set the maximum number of fragments that can comprise a single IP
packet destined to the router
Set the fragment chain to its default value
Set the maximum number of fragmented IP packets destined to the
router to reassemble at any given time
Set the fragment size to its default value
Set the maximum number of seconds to reassemble a fragmented IP
packet destined to the router
Set the fragment timeout to its default value.
Display information regarding fragmented IP packets that are destined
to a router
Comments? infodev@avaya.com
Description
October 2013