Avaya G430 Manual page 471

Root level command
ip ospf router-id
no ip ospf router-
id
router ospf
no router ospf
Administering Avaya G430 Branch Gateway
Command
no ip ospf
message-digest-
key
ip ospf network
point-to-
multipoint
ip ospf network
point-to-
multipoint
ip ospf priority
no ip ospf
priority
area
no area
default-metric
network
no network
passive-interface
Description
Return the interface to its default
value
Specify the network type for the
interface
Return the interface to its default
value
Configure interface priority used in
Designated Router election
Set the OSPF priority to its default
value
Configure the router ID
Return the router ID to its default
value
Enable OSPF protocol on the
system and to enter the router
configuration context
Restore the default value and
disable OSPF globally
Configure the OSPF area ID of the
router
Delete the OSPF area id
Set the interface OSPF route
metric value
Enable OSPF in a network
Disable OSPF in a network. The
default value is disabled.
Suppress OSPF routing updates
on an interface. Used to allow
interfaces to be flooded into the
OSPF domain as OSPF routes
rather than external routes.
Note:
Use the network command
with this command to make the
network passive.
The router
October 2013 471