Avaya G430 Manual page 87

5. Use the show download software status command to display the status of
Related topics:
Upgrading firmware using the USB mass storage device restore command
Upgrading firmware using the USB mass storage device "restore" command
About this task
The primary use of the restore usb command is to restore the entire Branch Gateway. If
you use the command to upgrade firmware, take care to follow instructions carefully.
Procedure
1. Back up the Branch Gateway by entering backup config usb usbdevice0
2. Obtain the firmware upgrade file(s) from Avaya and place them on your PC.
3. Insert the USB mass storage device into the PC's USB port, and copy the firmware
4. Remove the USB mass storage device from the PC, and insert it in the Branch
5. Enter restore usb usbdevice0 backup-name, where backup-name is the root
6. Enter show restore status to check the status of the restore operation.
Software and firmware uploads from the gateway
Files copied to a USB mass storage device
You can use a USB mass storage device inserted into the Branch Gateway USB port to copy
individual files to a USB mass storage device.
Administering Avaya G430 Branch Gateway
the firmware download process.
backup-name, where backup-name is the backup directory path and file name you
are creating on the USB mass storage device.
A backup directory is created on the USB mass storage device, with a directory
structure as detailed in
file(s) to the USB mass storage device as follows:
a. Copy Branch Gateway firmware files to the root directory.
b. Copy the Device Manager firmware file to the root directory.
c. Copy media modules' firmware files to the MM subdirectory.
d. Copy IP phone firmware files to the IPPHONE subdirectory.
Gateway USB port.
directory path and name on the USB mass storage device.
The report lists the upgraded files.
Sample backup directory after backup
Basic device configuration
on page 87
on page 92.
October 2013 87